“This link will take you to Amazon.”
This pre-assembled iPhone 11 6.1-inch Liquid Retina LCD screen features original-quality vibrant colors, 3D Touch response, and factory-tested luminance—no dead pixels or touch issues guaranteed. Including metal backplate for simplified DIY installation while preserving full Face ID functionality (transfer original sensors/earpiece), it offers 1-year warranty and 30-day returns at fraction of Apple Store costs.
Cracked screens demand $200+ carrier repairs typically. This kit enables professional restoration preserving biometric security through guided sensor transfer.
Pre-Assembled Design:
Factory-installed metal LCD shield plate.
Vibrant IPS panel matches original specs.
Triple QC: luminance/color/touch verified.
Face ID Compatible:
Transfer original proximity sensor/earpiece.
Dot projector/home button remain functional.
Detailed guide prevents common errors.
Economic Repair:
$50-80 vs. $200+ Apple Store.
Reduces e-waste vs. device replacement.
Lifetime technical support included.
Pros:
Matches OEM brightness/color accuracy.
Pre-assembled simplifies DIY 80%.
Face ID works perfectly post-transfer.
1-year warranty exceeds typical aftermarket.
YouTube guides abundant.
Cons:
Sensor transfer requires precision.
Heat gun/suction cup skills needed.
Warranty excludes installation damage.
OLED upgrades incompatible.
Liquid damage voids coverage.
Tools Required (15min job):
Pentalobe screwdriver (P2)
Phillips #000 screwdriver
Heat gun/iOpener
Suction cup
Opening picks (plastic)
Tweezers
Isopropyl alcoholCritical Steps:
1. Remove 2x bottom Pentalobe screws
2. Heat display edges (90sec iOpener)
3. Suction lift + opening pick perimeter
4. Disconnect battery connector FIRST
5. Remove display bracket screws
6. Transfer: earpiece/proximity sensor (alcohol loosens)
7. Install new screen connectors
8. Test Face ID before adhesive
9. Reapply T7000 adhesive stripsPro Tip: Battery disconnect prevents shorts.
Perfect Fit Models:
iPhone 11 A2221/A2111/A2223 all variants.
All carriers (AT&T/Verizon/T-Mobile).
Display Specs:
Size: 6.1" Liquid Retina IPS
Resolution: 828x1792 (326 ppi)
Brightness: 625 nits max
True Tone: Supported
3D Touch: Full functionalityFace ID Transfer: 95% success rate proper technique. Proximity sensor loosens isopropyl alcohol + plastic pick.
Apple Store: $199 (screen only)
Carrier: $250+ deductible
This Kit: $60-80 + $20 tools = $100 max
Savings: $100-150DIY Enthusiasts: iFixit confidence level 5+.
Budget-Conscious: Halve Apple repair costs.
Face ID Dependent: Biometrics essential.
Frequent Droppers: Annual replacement strategy.
E-waste Warriors: Extend device lifespan.
Avoid: No repair experience, True Tone calibration critical, OLED preference.
| Issue | Solution |
|---|---|
| No Touch | Re-seat digitizer cable |
| Face ID Fail | Proximity sensor transfer error |
| Color Wrong | True Tone calibration needed |
| Backlight Dim | LCD cable connection loose |
| Ghost Touch | Screen damage—return kit |
Face ID works after replacement?
Yes—transfer original sensor assembly.
True Tone supported?
Yes—ambient light sensor transfers.
Harder than iPhone XR?
Similar difficulty—battery disconnect critical.
Warranty voided?
No—Apple warranty unaffected screen repair.
OLED upgrade possible?
No—LCD connector incompatible.
Tools included?
No—standard iFixit kit recommended.
iPhone 11 Screen Replacement Kit scores 9.2/10 as premier DIY restoration solution. Pre-assembled design + Face ID compatibility deliver Apple Store results for 40% cost. Vibrant Retina quality matches original while 1-year warranty provides confidence. Essential for cracked screen victims preserving biometrics affordably—professional repair skills unnecessary with abundant guides.
Disclosure: Contains affiliate links. Commission earned at no extra cost. Opinion based on iPhone repair standards.